DPC-S85 is a two-component, slow curing, no odor, hybrid polyaspartic coating system designed as a decorative yet durable coating for commercial and industrial flooring. Formulated with aliphatic chemistry, PP-S85 is color stable, allowing UV exposure without color shifts seen with other coating systems such as epoxies. PP-S85 is a 1:1 mix ratio system with sufficient pot life to be rolled, brushed, or sprayed. It has a robust application window with the ability to apply at low temperatures and high humidity.

ADVANTAGES:

• Lower odor than most polyaspartics
• Cures at temperatures just above freezing
• Can be applied below -20°F (-28.9°C). Will cure with special handling
• Excellent UV resistance, non yellowing and high gloss characteristics
• Excellent color stability
• Achieve a variety of colors, patterns, and logos, using decorative flakes, particles, or signs
• Excellent abrasion and impact resistance
• Available in low VOC and also in zero VOC formulation for restricted areas such as Southern California
• Micro media traction agents can be introduced into the liquid system or dispersed into the top coat
• Excellent chemical resistance, resistant to skydrol
• Resistant to hot tire peel
• Excellent coefficient of friction properties
• High build capability in lifts of 10 – 12 mils maximum
• Can be matted with a matting agent
• Bonds to virtually all substrates of any dimension, including metals, concrete, and fiberglass
• Tolerant to 300°F (149°C) for random, incidental heat contact
• VOC compliant in all 50 States and Canada

WHERE TO USE:

• Marine protection for fiberglass, steel, concrete or wood
• UV-stable top coat
• Aircraft hangar floors
• Low temperature equipment
• Maintenance facilities
• Offshore platforms
• Industrial shop floors
• Secondary Containment
• Cooling towers
• Bridges
• Wastewater treatment applications